7-033 FPR Housing -Billet Aluminum W/Pressure Shim Springs 7.3L 1999-2003 Ford

$64.88

FPR Replacement Housing – Billet Aluminum finished in a satin black anodized process. With 3 springs to allow you to set your fuel pressure to the performance levels that you wish to achieve

In stock

Description

Fuel Pressure Relief Replacement Housing – Billet Aluminum finished in a satin black anodized process
With 3 springs to allow you to set your fuel pressure to the performance levels that you wish to achieve  
If you have broken the threads from the fragile stock housing or if you just want to increase your fuel pressure for better performance, this Heavy Duty billet housing with interchangeable springs is your solution. Manufactured to OEM measurements, it will easily replace the cast factory regulator housing.
Three different fuel pressure spring settings*
  1. 58-61 psi  silver spring  (Stock pressure)
  2. 62-65 psi  gold spring
  3. 67-70 psi  black spring
 Also included in the kit is a new housing to fuel bowl o-ring and 2 new black oxide mounting bolts.
Due to the extreme weakness of the factory housing where the threaded compression fitting meets the housing body, we have received numerous calls from customers that have broken the threads off of the factory housing. Usually when this happens it is necessary to cut off the flare end of the hard line in order to remove the broken piece and compression nut from the line. The hardline then needs to be re-flared but it is now shorter and may be difficult to connect back to a factory housing.
With this in mind, we have made this housing wider than the original to compensate for those that have had to cut the end of the hardline off to repair this defect.
 Installation instructions: Download PDF file Here.
Fuel Line Compression Sleeve
60-VLV5 Please note that the fuel compression sleeve (Parker 60VLV-5 Viton Sleeve 5/16 Inch) that seals the return hard line to the FPR housing is NOT reusable. The old sleeve will come out in at least 2 pieces, if not so dried up and cracked that you will have to remove the pieces with a pick tool. If you attempt to re-use a compression sleeve after it has been in service a few thousand miles, it will leak.

Additional information

Weight .5 lbs
Dimensions 3 × 3 × 3 in

Reviews

There are no reviews yet.

Be the first to review “7-033 FPR Housing -Billet Aluminum W/Pressure Shim Springs 7.3L 1999-2003 Ford”

Your email address will not be published. Required fields are marked *